ELECTRONICA

12 high-performance active two-way loudspeaker system with on-board CORE digital processing and 1500W digital amplifier

Dans votre sélection Ajouter à ma sélection  |  Imprimer  |  Envoyer à un ami  |  Retour aux résultats
   » Hauts-parleurs et enceintes    »  Publié le 2015-06-18  [Lu  2093  fois]


NEOS AXS series represents the highest expression of PROEL Research & Development applied in loudspeaker systems and incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium sound, maximum performance and up-to-date features. NEOS AXS is a complete range of self-powered loudspeaker systems combining cutting-edge transducers with CLASS D amplifiers and digital processors, thus ensuring the best integration between acoustics and electronics for an optimal performance.
NEOS AXS are designed for the use both as high-performance mobile systems for live applications and as versatile and remotely controllable systems for advanced fixed installations. All full-range models in the NEOS AXS Series are provided with a dual-angle pole holders (0° or -7.5°), which allows a tilted vertical position for optimal coverage of the listening area and with an asymmetric HF horn that can be rotated to change the dispersion angle when the speaker sits horizontally. All the models, also available in passive versions (PX), are housed in rugged in 15/18mm birch plywood cabinets, featuring die-cast handles and multiple flying points. A wide range of accessories is available for suspension in permanent installations or live applications.
All the models are powered by DA power modules, a new generation of CLASS D power amplifiers with SWITCH MODE power supply, able to provide an exceptional sound definition together with very high dynamics and low distortion in an ultra-compact package. The onboard control electronics are based on the 96 kHz, 40bit floating point CORE DSP platform, able to optimize further the system performances through the use of sophisticated EQ, crossover and dynamics algorithms. The CORE processing provides also network functionality through the PRONET control software based on CANBUS communication protocol (USB2CAN converter needed). The PRONET control software provides access to the major processing features, including full PARAMETRIC and DYNAMIC EQ, advanced COMPRESSOR/ LIMITERS and DELAY, together with the real time control of parameters such as temperature, supply voltage and protections. Setting created by the user can be saved in user presets that can be recalled through the control software or from the unit’s interface.
The NEOS AXS HIGH-PERFORMANCE models provide the highest level of performance and are intended for the use in the most demanding applications.
The two full-range models (12” and 15”) feature woofers with neodymium magnets and large voice coils, capable of handling extremely high power levels, and compression drivers with exceptional linearity and effi ciency. Both models are fitted with an advanced supspension system featuring FLY TRACK flying points, which allow to form multiple clusters in absolute safety.
The speakers used in the two sub-woofers off er the latest in transducer technology, such as die-cast baskets with double ventilation, ISV (Interleaved Sandwich Voice Coil), DSS (Double Silicon Spider) and DDR (Double Demodulating Rings). The enclosure innovative design provides the high output level and dispersion control of a horn-loaded system, plus the damping and deep bass of a bass-reflex system with a symmetrical, exponential-profile tuning port.
In all the active models the remote control of all the system parameters is available thru the PRONET software. For a correct filtering, EQ and alignment of the passive versions, we recommend the use of PROEL PC260 digital processor that provides the same high-performance processing as the built-in DSP in the active versions.

  • Bi-amplified digitally processed 2-way system
  • 1.4” compression driver with 3” VC on a 100°>80° x 60° asymmetrical horn
  • 12” neodymium woofer with 3” voice coil
  • 1500 W DA digital power amplifier with Switch Mode Power Supply (SMPS)
  • 96 KHz, 40bit floating point CORE DSP
  • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY
  • SPL MAX 132 dB
  • Frequency response 55 Hz - 20 kHz
  • Compact and lightweight birch plywood asymmetrical cabinet
  • Dual-ange pole holder
  • 1 aluminum side handle
  • 4 x FLYTRACK + 1 x M10 flying points
  • Made in Italy

Technical Specifications

Amplifier Continuous Power: 750 + 750 W DA Class D with SMPS
  • System type: Full range 2-way, vented
  • Input Impedance: 20 kohm balanced, 10 kohm unbalanced
  • Frequency response: 40 Hz - 20 kHz
  • Sensitivity: 132 dB MAX SPL
  • Input Sensitivity: +4 dBu / 1.25 V
  • Low Frequency Device: 12” neodymium woofer - 3” VC
  • High Frequency Device: 1.4” compression driver - titanium diaphragm - 3” VC
  • Signal Processing: CORE processing 24 bit / 96 kHz
  • Coverage Angle H. (-6 dB): 100°>80° H x 60° V
  • Trapezoidal taper: 10°
  • Monitor Taper: 42°
  • Power Supply: 230 VAC 50Hz or 120 VAC 60 Hz
  • Cooling: Variable speed DC fan
  • Connectors: IN - LINK: XLR M - XLR F NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA)
  • Construction: 15-18mm birch plywood
  • Finishing: Anti-scratch black paint
  • Mounting Pole: 1 bottom dual angle (0° / 7.5°)
  • Flying System: 4 x fly tracks - side and 1 x M10 rear
  • Weight: 28 kg (61.740 lb)
  • Dimensions (W x H x D): 410 x 600 x 360 mm
  • Controls: LEVEL, PRESET (FLAT / HPF / MONITOR/ USER), TERMINATE, GND LIFT


  •  

     Sujet :
     Message :
    Décrivez votre besoin...
     
    Diffusez cette demande à d'autres fournisseurs
     E-mail :
     
     

    Accueil | Présentation | Information générale | Contact | Catalogue produits | Actualités